The Art &
Science of
Marble Mastery
A complete, documented methodology governing every phase — from marble selection to decades after handover.
Begin Your Journey
Marble flooring is not a task.
It is a system.
Most marble failures — cracking, lippage, staining, dullness — are not accidents. They are predictable outcomes of missing process ownership.
Ten Phases of Excellence
Each phase is documented, measurable, and non-negotiable
Selection
Engineering
Site
Inspection
Vastu
Levelling
Installation
Engineering
Curing
Stabilisation
Geometry
Correction
Polishing
28,000 Grit
Performance
Tuning
Protection
Systems
Handover
Documentation
Wrong selection guarantees future failure — regardless of installation quality.
Marble Selection
Engineering
Marble selection is not an aesthetic decision. It is an engineering decision with long-term consequences. Many visually premium marbles are structurally unsuitable for specific applications.
Density
Structural integrity under load
Porosity
Absorption & stain resistance
Vein Structure
Crack propagation risk
Refinement Ceiling
28,000 grit suitability
Access to India's Finest
Marble Sources
Through our exclusive partner network, we provide access to premium marble sources across India — with guaranteed quality, perfect vein matching, and book-matched slabs for seamless aesthetics.
Guaranteed Quality Stones
Every slab vetted for density, porosity, and structural integrity. No compromises on engineering standards.
Perfect Vein & Book Match
Slabs selected for visual continuity. Book-matched pairs for mirror-image patterns across large surfaces.
Source Traceability
Complete documentation of quarry origin, processing, and quality certifications for every slab.
Are you a marble showroom or processing unit?
Join our Partner ProgramPre-Installation
Site Inspection
The site must be engineered before marble arrives. Every decision is determined by site conditions — not assumed or standardized.
Substrate Flatness Mapping
Laser-level documentation of plane deviations zone-by-zone
Moisture Behaviour Analysis
Migration risk, seasonal variation, curing timeline
Structural Movement Zones
Expansion joints, settlement areas, differential movement
Environmental Exposure
Light patterns, thermal cycling, humidity levels
Vastu-Enabled
Floor Levelling
Where Traditional Wisdom Meets Engineering Precision
"A marble floor is not just a surface."
It is a plane through which energy, movement, and usage flow continuously.
What Most Don't Understand
Vastu is often discussed in terms of direction, placement, and orientation. What is rarely understood — even by many Vastu consultants — is that floor level behaviour is one of the most critical and least correctly implemented aspects of Vastu.
Key Impacts
Why Floor Levels Matter in Vastu
In Vastu Shastra, the building is understood as an energy system. Within this system, floor levels influence stability, flow, and accumulation.
Incorrect floor levelling can result in:
Instability
In the South-West zone
Energy Drainage
Unintended flow toward exits
Imbalanced Movement
Of people and activities
Psychological Discomfort
That occupants cannot explain
These issues are often attributed to "bad Vastu" without addressing the actual physical cause: incorrect gradients and level transitions.
Understanding the Two Zones
In Vastu, the floor plane is divided into zones of significance. Two are paramount for levelling decisions.
Stability & Control
- The heaviest and most stable zone
- Never lower than the North-East
- Gradients should never slope away
A difference of even a few millimetres — invisible to the eye — can reverse the intended gradient.
Flow & Movement
- Should remain lighter and receptive
- Allow natural flow, not accumulation
- No abrupt level drops or improper slopes
True Vastu alignment does not require dramatic level differences. It requires precision.
Energy flows from higher (SW) to lower (NE) zones
The Amplification Effect
Polishing up to 28,000 grit further amplifies any levelling inaccuracies if they are not corrected early.
GRIT
Error Visibility
20%
Initial
GRIT
Error Visibility
40%
Emerging
GRIT
Error Visibility
70%
Visible
GRIT
Error Visibility
100%
Magnified
Same 1mm error — dramatically different visibility at each stage
True Vastu alignment requires physical precision — not intention alone.
04Installation Engineering
A controlled engineering operation. Every decision governed by site diagnosis and material characteristics — not speed or convenience.
- Substrate to defined tolerances
- Bonding system compatibility
- Uniform load distribution
05Curing & Stabilisation
After installation, marble must remain undisturbed. This is engineering requirement, not delay.
- Bonding system full cure
- Moisture equalisation
- Internal stress release
06Geometry Correction
Polishing cannot correct geometry. Micro variations must be addressed before finishing begins.
- Lippage Tolerance
- < 0.5mm
Progressive Polishing
Up to 28,000 Grit
Where conventional industry stops, we continue — transforming appearance into performance.
The Industry Standard
Conventional polishing stops at 8,000–15,000 grit — the point at which the floor looks glossy. This is appearance-based completion, not performance-based finishing.
"The floor looks shiny. It must be done."
The Arelic Standard
Our research-led abrasive progression extends refinement to 28,000 grit in selected applications. This is about surface equilibrium — stability that persists for years.
"The goal is stability, not gloss."
Abrasive Progression Journey
Coarse
Material removal & levelling
Medium
Scratch pattern refinement
Fine
Surface densification
Ultra-Fine
Micro-surface equilibrium
Why Refinement Beyond 15,000 Grit Matters
Micro-irregularities affect wear patterns over years
Cleaning chemical interaction changes with surface density
Re-polishing frequency decreases with higher initial refinement
Stain penetration resistance improves with surface closure
Refinement
Completion & Beyond
08Performance Tuning
Final surface characteristics tuned to usage — traffic intensity, safety requirements, cleaning behaviour. Responsibility determines finish, not preference.
09Protection Systems
Protection is a system — penetration behaviour, breathability, surface compatibility, long-term stain resistance. Protection preserves good process.
10Documentation & Handover
Complete baseline documentation — surface condition, usage guidance, maintenance expectations, warranty. Ambiguity is eliminated. Responsibility is documented.
Month
Workmanship Warranty
Warranty &
After-Service Care
30-Month Workmanship Warranty
Covers installation integrity and process adherence. Not conditional on maintenance compliance.
Dedicated Marble Engineer
Single point of responsibility post-handover. No call centres, no generic support. Your engineer knows your floor.
NFC-Enabled Warranty Access
One-touch access to warranty details, surface records, and baseline retrieval. Direct routing to assigned engineer.
Water Level vs Laser Level
The difference between looking correct and being correct
Craft-Based Judgement
Water levels and visual judgement create floors that look correct. The craftsman's eye determines when work seems complete.
- Visual correctness
- Experience-based decisions
- Appearance-based completion
Measured Precision
Laser levels and documented precision create floors that are correct. Instruments determine actual levelness, tolerances establish completion.
- Measured precision
- Engineering control
- Performance-based certainty
The difference is not visible at completion. It is measurable over years.
Marble failure is
predictable and preventable.
Choosing without SOP-driven process is a risk. The consequences manifest over years — long after the decision has been forgotten.
Arelic is chosen for certainty, not polishing.